HOW TO FIX HP DL380G ARRAY CONTROLLER IS IN LOCK-UP STATE
April 2, 2017 / by Marco / Categories : Business, Hardware, Technology
I recently borrowed my brother’s HP DL380G server as I wanted to see if there was any difference in rendering speed for video content. When I tried installing Windows 7 on the server it kept freezing. Upon restarting the server several times, I noticed there was an error message during bootup. The message was:

Slot 1 HP Smart Array P4000 Controller
1783-Slot 1 Array controller is in a lock0up State due to a hardware configuration failure. (Controller is disabled until this problem is resolved).
I guess the reason why the Windows 7 installation kept freezing was because it couldn’t find any HHD to store windows. So with a bit of troubleshooting, I managed to work out the problem and it had to do with the Raid Controller.
The RAID Controller is located here.

The RAID controller has a Memory module connected to it. This is the module:

Remove the module from the card and leave it out for a few minutes. Make sure there are no cables connected to it eg the battery cable.


Reconnect the module and reinsert it on the card.Reconnect all the cable and then try to see if the error message is gone. This fixed my issue!
I also decided to take a few photos inside the unit since I had the cover open. Here’s a few picture for heat sinks and memory:


Our Sponsors
- Advertise Me Pty Ltd
Digital Signage Solutions
OTHER ARTICLES YOU MAY LIKE
REVIEWING AND UNBOXING THE TOOCKI USB-C RIGHT ANGLE 1.2M CABLE
USB C cables are among the most ordinary accessories we own, yet they can make a surprisingly noticeable difference to how comfortable our devices are to use while charging. The Toocki USB C right angle cable is a good example of a simple accessory that tries to solve a very common irritation, because instead of […]
read more
QUICK FIX TO CHANGE THE MAX SELL POWER TO LESS THAN 500W ON THE DEYE INVERTER
There are many reasons a home owner or installer might want to place a tight cap on how much solar power is exported to the public grid. Some households live under a strict export cap imposed by their local distribution network operator, others want to reduce export to focus on self consumption and battery charging, […]
read more

